The comprehensive final clean, preparing your space for handover, owner walkthrough, and move-in readiness.
- MOVE-IN READY
The first post-construction clean,
preparing your space for inspection before the GC punch walk.
- PRE-PUNCH READY
Clean • Walkable •
Ready for Inspection
WHAT IT IS
What Is Final Cleaning?
Final cleaning (also called post-punch clean, handover clean, or turnover clean) is the comprehensive, white-glove standard clean performed after trade punch items are resolved and before building turnover.
This is the heavyweight of construction cleanings. It removes all remaining fine dust, smudges, paint splatter, and residues, ensuring every surface, fixture, and window is fully polished, sanitized, and move-in ready for owners, tenants, and facility inspectors.
WHY IT MATTERS
Why Is Final Cleaning Done After Punch Walk?
Subcontractors completing punch-list repairs generate fresh drywall dust, paint splatter, caulking residue, and heavy foot traffic. Performing the final clean only after all punch items are resolved guarantees a pristine, spotless finish.
This eliminates rework and ensures the facility is in 100% white-glove condition for the owner walkthrough and turnover.
01
Zero Trade Dust
All touch-ups, patch repairs, and trade work are 100% finished, ensuring no new dust settles on cleaned surfaces.
02
Pass Owner Walkthrough
Delivers the white-glove, streak-free standard required by building owners, architects, and facility directors.
03
Move-In Ready Standard
From polished floors to sanitized restrooms and crystal-clear glass, the space is immediately ready for turnover.
OUR TYPICAL SCOPE
What's Included in Final Cleaning?
Floors & Polishing
Machine scrub, buff, and polish hard floors. Edge vacuum carpets, clean transition strips, and remove all construction haze.
Streak-Free Glass
Complete streak-free polish of interior glass, partitions, entryways, mirrors, and detailed wipe-down of window frames and tracks.
Walls, Doors & Trim
Damp-wipe walls, door frames, baseboards, kick plates, light switches, and cover plates to remove finger marks and fine dust.
Millwork & Casework
Deep clean inside and outside of all cabinets, shelving, casework, vanities, and hardware; free of sawdust and residue.
Millwork & Casework
Deep clean inside and outside of all cabinets, shelving, casework, vanities, and hardware; free of sawdust and residue.
Restroom Sanitation
Thoroughly sanitize ceramic tile, grout, toilets, sinks, partitions, and polish chrome plumbing fixtures to a shine.
HVAC Diffusers & Fixtures
Detailed vacuuming and wiping of ceiling diffusers, air returns, grilles, and light fixtures to prevent dust recirculation.
KNOW THE DIFFERENCE
What Final Cleaning Is Not
Final cleaning delivers a move-in-ready, spotless finish, but it does not replace trade craftsmanship or exterior site work. Here is what stays outside the final cleaning scope.
Not Trade Defect Corrections
Final cleaning does not include painting touch-ups, drywall repairs, grout hazing requiring trade acid wash, or hardware adjustments. These remain with the respective trades.
Not Exterior Site Grounds
High-pressure washing of parking lots, exterior building facades, curtainwalls, or landscape detailing is not included unless specifically contracted.
READY FOR YOUR PUNCH WALK?
Get your construction space clean,
walkable, and ready for inspection.
THE CONSTRUCTION CLEANING PROCESS
Where Final Cleaning Fits
Final cleaning is the critical penultimate step before building turnover and occupancy.
Here’s how it all fits together.
A Clear Process.
Better Results.
From first clean to final turnover, we keep your project on track.
01
Trades Substantially Complete
All major trades are finished and the space is ready for cleaning.
02
Rough Clean
Remove construction debris, dust, and residue so the space is walkable and ready for inspection.
03
GC Punch Walk & Punch List
The GC, superintendent, and design team inspect the space and identify punch items.
04
Trade Corrections
Trades make the necessary corrections to complete the work.
05
Final Clean
Detailed cleaning to remove remaining dust and prepare the building for turnover.
06
Owner / Architect Walk & Turnover
The space is reviewed and formally turned over to the owner or architect.
FINAL VS. ROUGH
Final Cleaning vs. Rough Cleaning
Both are important. Here’s how they differ:
Rough Cleaning
BEFORE PUNCH WALK
Removes construction debris
Clears out trash, packaging, and residue from the site.
Makes work inspectable
Lets the GC, superintendent, and design team see the finished work clearly.
Broom-clean to lightly detailed
Leaves the space clean, walkable, and ready for punch.
Focuses on bulk cleaning
Targets dust, dirt, and construction-related mess (does not include white-glove polish).
Final Cleaning
AFTER PUNCH CORRECTIONS
Prepares for turnover
Creates a move-in ready space for the owner or occupant.
Includes detailed cleaning
Focuses on a high standard, including white-glove polish and detail work.
Cleans after trade corrections
Addresses areas that were reworked after punch items.
Covers all surfaces
Deep cleans floors, glass, fixtures, cabinets, restrooms, and more.